Product Category: Gear Grease
Product Features: EUBO SL3 gear grease contains white solid lubricant and special high molecular polymer, which can give full play to its lubricity, noise reduction and anti-wear properties.
Advantages/Features of SL3 Gear Grease:
(1)Contains white solid lubricant and special polymer, which can give full play to its lubricity, noise reduction and anti-wear properties;
(2)All synthetic oils are used as base oils, with excellent low temperature performance, little change with temperature, and the operating temperature range is -45~150℃;
(3)long lasting;
(4)Low seepage, can be used in places requiring high cleanliness;
(5)Does not contain silicone and will not cause electrical contact failure.
Application Range of SL3 Gear Grease:
1、Suitable for the lubrication of plastic/plastic, metal/metal and plastic/metal contact surfaces.
2、Suitable for plastic parts in auto parts, electrical appliances, precision instruments, audio equipment, and office equipment.
How to Use:
Like ordinary lubricating grease, use a brush, scraper or automatic lubrication device to apply or fill, and the surface of the workpiece should be kept clean to avoid oxides, dust and oil from affecting its adhesion.
Packing specification: 18KG/barrel
Storage Method:
--After use, please seal the mouth of the can to avoid contamination of the product.
--Store in a cool and dry place.
--Do not touch oxides, strong acids, and alkaline substances.
Precautions:
• It needs to be stirred evenly before use, and the amount added should be appropriate, and it should be smoothed after use to prevent oil separation.
• Storage environment, please ensure good ventilation during operation.
• Pay attention to regular filling and replacement of grease.
• After touching this product, wash your hands before eating.
• Keep clean during use to prevent the mixing of mechanical impurities, dust, water and other solvents.
• It is forbidden to mix lubricating greases of different brands and types.
Effective Guarantee Information-Please Read Carefully
The information provided here is accurate. However, because the conditions and methods of using the company's products are beyond our control, this information cannot replace the customer's tests to ensure that the products are safe, effective, and fully satisfactory for the specific end use. The usage suggestions we provide should not be regarded as the cause of infringement of any patent rights.
This information does not include the safety information required for the safe use of this product. Before use, please read the product and its safety data sheet and container label to obtain information about the safe use of the product, physical and health hazards.
The Index Parameters of SL3 Gear Grease:
Test items | Standard value | Testing method |
Exterior | White | Visual inspection |
Status | Uniform ointment | Visual inspection |
Consistency grade(NLGI) | 1~2 | ISO 6743-99 |
Work penetration(25℃,0.1mm) | 280~310 | ASTM D 217 |
Dropping Point(℃) | ≥200 | ASTM D 2265 |
Stencil oil separation(100℃×24h,wt%) | ≤5.0 | ASTM D 6184 |
Copper corrosion(100℃×24h) | Qualified | ASTM D 130 |
Evaporation loss(99℃×22h,wt%) | ≤0.5 | ASTM D 972 |
Recommended temperature(℃) | -45~150 | —— |
Environmental certification | RoHS REACH Halogen-free 17P EN71-3 PAHs | |
Shelf life (years) | 6 | —— |
Remarks: 1. The appearance of the product may change due to raw material factors; 2. Please refer to the compatibility table for the compatibility of this product with rubber and plastic materials. |
t
a
l
k