Product Classification: EU-AD138 two-component curing adhesive
Product Features: Ubao® EU-AD138 is a high-strength two-component room temperature curing adhesive with high viscosity and low odor with thixotropy. It has good resistance to environmental erosion and excellent resistance to chemical media, and is suitable for bonding metals, electronic components, glass steel structural parts and other materials used in high temperature or harsh environments. The product has low volatility, so it is suitable for applications in electronic communications and other fields.
Product Introduction:
Ubao® EU-AD138 is a high-strength two-component room temperature curing high viscosity, low odor adhesive with thixotropy. It has good resistance to environmental erosion and excellent resistance to chemical media, and is suitable for bonding metals, electronic components, glass steel structural parts and other materials used in high temperature or harsh environments. The product has low volatility, so it is suitable for applications in electronic communications and other fields.
Main Features:
Off-white paste
High temperature and chemical resistance
Low shrinkage
Excellent water resistance and resistance to various chemical media
Instructions for use:
The glued area should be cleaned of oil or other stains and cleaned.
Apply the glue to the parts to be bonded through the matching mixing tube. If possible, apply pressure and use fixed tools. Place the bonding part in a room temperature environment and stand still for 5 hours (related to the actual temperature) to reach 70-80% of the final strength.
The curing speed of this product depends on the room temperature environment.
After using this product, close the lid immediately.
When the temperature is lower than 20℃, it must be warmed up in the environment for at least 2 hours before use.
Precautions:
Keep away from children.
Do not pour the poured glue back into the original packaging to avoid contamination of the glue. This product contains organic amines, which are irritating to the skin, mucous membranes and eyes.
Characteristics Before Curing
Typical value | ||
A | B | |
Exterior | White paste | Gray black paste |
Basic chemical composition | Epoxy resin | Hardener |
Viscosity (Pa.s) | 90~110 | 280-320 |
Density(g/cm3) | 1.50-1.60 | 1.50-1.60 |
Curing Characteristics
Proportion | A:B=2:1 |
Curing conditions | Room temperature curing |
Gel time | 3h |
Hardness (Shore D)(GB/T 2411-1980) | 70-80 |
Tensile strength (MPa)(GB/T 1040-1992) | 20-25 |
If you accidentally contact your eyes and skin, rinse immediately with clean water and go to the hospital for examination. For details, please refer to the MSDS of this product.
Packing specification
Ordering code: EU-AD138, 30ML/piece, 50ML/piece.
Storage conditions
Store in a cool and dry place at 8-28°C. Don't be affected by light or humidity
Storage period: six months.
t
a
l
k