Product Category: Bearing Grease
Product Features: EUBO L-18 bearing grease has excellent high temperature performance, excellent extreme pressure anti-wear performance and micro-pitting resistance, good water resistance, and can work long-term in complex environments.
Advantages/Features of L-18 Bearing Grease:
(1)Excellent high temperature performance, good viscosity-temperature performance.
(2)Excellent extreme pressure anti-wear performance and anti-micropitting performance.
(3)Excellent anti-rust performance and low volatility.
(4)Good water resistance, long-term work in complex environments.
(5)The base oil is non-toxic, tasteless and meets environmental protection requirements.
Application Range of L-18 Bearing Grease:
1、It is suitable for lubrication of balls, rollers, sliding bearing-based baking equipment gears, chains, supporting wheels and other parts under high temperature and heavy load.
2、It is suitable for lubrication and noise reduction of high temperature and high load parts such as gears and bearings in heavy industrial equipment such as cement plants and steel plants.
How to Use:
Like ordinary lubricating grease, use a brush, scraper or automatic lubrication device to apply or fill. The surface of the work piece should be kept clean to avoid oxides, dust and oil from affecting its adhesion.
Storage Method:
--After use, please seal the mouth of the can to avoid contamination of the product.
--Store in a cool and dry place.
--Do not touch oxides, strong acids, and alkaline substances.
Packing Specification: 18KG/barrel
Precautions:
• It needs to be stirred evenly before use, and the amount added should be appropriate, and it should be smoothed after use to prevent oil separation.
• Storage environment, please ensure good ventilation during operation.
• Pay attention to regular filling and replacement of grease.
• After touching this product, wash your hands before eating.
• Keep clean during use to prevent the mixing of mechanical impurities, dust, water and other solvents.
• It is forbidden to mix lubricating greases of different brands and types.
Effective Guarantee Information-Please Read Carefully
The information provided here is accurate. However, because the conditions and methods of using the company's products are beyond our control, this information cannot replace the customer's tests to ensure that the products are safe, effective, and fully satisfactory for the specific end use. The usage suggestions we provide should not be regarded as the cause of infringement of any patent rights.
This information does not include the safety information required for the safe use of this product. Before use, please read the product and its safety data sheet and container label to obtain information about the safe use of the product, physical and health hazards.
Index Parameters of L-18 Bearing Grease:
Test items | Detection value | Testing method |
Exterior | Light yellow | Visual inspection |
Status | Uniform ointment | Visual inspection |
Consistency grade（NLGI） | 3 | ISO 6743-99 |
Work penetration (25℃，0.1mm) | 220～250 | ASTM D 217 |
Dropping Point（℃） | ≥260 | ASTM D 2265 |
Stencil oil separation（100℃×30h，wt%） | ≤3.0 | ASTM D 6184 |
Copper corrosion（100℃×24h） | Qualified | ASTM D 130 |
Evaporation loss（99℃×22h，wt%） | ≤5.0 | ASTM D 972 |
Extreme pressure performance（PD ,N） | ≥2453 | ASTM D 2783 |
Water resistance（38℃×1h，wt%） | ≤5.0 | ASTM D 1264 |
Similar viscosity（-10℃、10s-1，pa·s） | ≤1800 | ASTM D 1092 |
Recommended temperature（℃） | -28～180 | —— |
Environmental certification | RoHS REACH Halogen-free 19P EN71 | |
Shelf life (years) | 6 | —— |
Remarks:
1、The appearance of the product may change due to raw material factors;
2、Please refer to the compatibility table for the compatibility of this product with rubber and plastic materials.
t
a
l
k
QQ talk
talk